Anyone who runs HBC Radiomatic crane or pump-truck controls knows the moment a transmitter battery dies mid-shift. A dead 6V pack on a jobsite means walking down, hunting for a spare, and losing momentum on the lift. I put together this roundup for operators, mechanics, and shop leads who need a reliable Ni-MH replacement that drops straight into an existing BA214061, BA213020, or FUB10AA handheld. The five options below cover single-pack, twin-pack, and quad-pack configurations in two capacity tiers, so you can match inventory to your rotation.
The Lineup, Simplified
What Each Pick Brings To The Table
Starting simple, the single Giobbiy BA214061 in 1500mAh form is the easiest way to keep one transmitter ready without buying extras you don’t need. The 2x6V Ni-MH chemistry is built as a direct fit for HBC Radiomatic handhelds, and the universal model coverage spans BA214061, BA213020, FUB10AA, and MN471560 shells.
At roughly 420 grams and 251 x 55 x 20 millimeters, the pack drops into the existing battery compartment with no modification. For a solo operator who wants a single spare on the bench, this is the lowest-commitment entry point on the list.
What Makes Sense
- Single-pack format keeps cost and storage low for one remote
- Direct-fit dimensions match the original BA214061 footprint
- Ni-MH chemistry avoids the memory effect of older NiCd cells
- Lightweight at 420 grams, easy to keep in a toolbox
Trade Offs
- 1500mAh capacity runs shorter on heavy-use shifts than the 2100mAh sibling
- No included spare means downtime if the single cell ever fails
Who It Suits Best
A solo crane or pump-truck operator who wants one backup cell ready to swap into a single handheld remote.
Consider Something Else When
Two-operator crews should look at the Giobbiy BA214061 6V 1500mAh Battery (2-Pack) instead for rotating spares.
The same 1500mAh cell in a two-pack configuration makes more sense for active jobs where one battery always sits on the charger while the other powers the remote. Compared to pick 1, you’re getting a matched pair with no guessing about cell age or capacity balance between packs.
For small shops running two operators, this is the cleanest inventory move. Ni-MH (nickel-metal hydride) cells hold charge well during storage and tolerate partial top-ups without the gradual capacity loss that older chemistries suffered.
Strong Points
- Matched pair ensures equal capacity across both units
- Charge one while the other runs the remote
- Same universal fit across BA214061, BA213020, FUB10AA, and MN471560
Honest Caveats
- 1500mAh rating still trails the 2100mAh options for extended shifts
- Two packs add storage bulk in already tight shop drawers
- Ni-MH cells self-discharge slowly, so bench-stored spares may need a top-up before redeployment
Quick Facts
Right Fit For
Two-operator shops running alternating shifts who want a fresh cell always ready to swap in.
Where Another Pick Suits Better
Fleets running four or more remotes should jump to the Giobbiy BA213020 6V 2100mAh Battery (4-Pack) for broader coverage.
Capacity jumps notably with the 2100mAh single pack, and the source lists roughly eight hours of usable runtime per full charge on HBC crane remotes. Compared to the 1500mAh units in picks 1 and 2, that translates to real coverage through a long shift without a mid-day swap.
The internal resistance sits around 10 ohms and the cycle life is rated for 10,000 charge-discharge cycles, which suggests this cell is built for repeated daily use over years rather than occasional duty. For an operator who hates mid-shift surprises, the larger cell is the safer bet.
Positive Takeaways
- 2100mAh capacity supports about 8 hours of remote operation per charge
- 10,000-cycle rating suits daily use over multiple years
- 10-ohm internal resistance keeps discharge steady under load
- Low self-discharge means the cell holds charge during storage on the bench
Some Limits To Know
- Single pack leaves no on-the-fly spare for high-rotation shifts
- Higher capacity adds a small cost premium over the 1500mAh option
- Ni-MH chemistry still loses charge in storage faster than lithium alternatives
Best Suited To
Operators running full eight-hour shifts who want maximum runtime from a single cell.
Look Elsewhere When
Crews needing rotation coverage should pick the Giobbiy BA213020 6V 2100mAh Battery (2-Pack) for parallel charging.
Fleets running several remotes at once benefit from the four-pack at 2100mAh per cell. Each pack shares the same 10,000-cycle rating and the same roughly eight-hour runtime as the single-pack version, so you’re scaling coverage rather than changing chemistry.
For larger operations, having four matched cells on hand means one for each active handheld, one on the charger, and one held in reserve. Compared to the 1500mAh 2-pack earlier in the list, this is the higher-throughput answer for shops that can’t tolerate idle remotes.
The Practical Payoff
- Four matched 2100mAh cells cover multi-remote operations
- Identical 10,000-cycle rating as the single-pack sibling
- Each cell supports about eight hours of transmitter use
- Universal fit across HBC BA214061, BA213020, FUB10AA, and MN471560 shells
Points To Keep In Mind
- Four-pack storage requires a dedicated charging area or rack
- Larger upfront purchase versus smaller configurations
- Owners commonly report Ni-MH cells benefit from periodic full discharge cycles to maintain capacity over years
Feature Snapshot
Whose Shelf It Belongs On
Multi-operator shops and rental fleets managing several HBC crane remotes simultaneously.
Skip It When
Solo operators should pick the Giobbiy BA213020 6V 2100mAh Ni-MH Battery (Single Pack) for simpler inventory.
The 2-pack in 2100mAh form is the sweet spot for crews stepping up from the 1500mAh tier without committing to a four-pack inventory. You get two matched cells with the same 10,000-cycle rating, the same roughly eight-hour runtime, and the same 10-ohm internal resistance profile.
This configuration works well when one cell runs the primary remote and the second sits charged on the bench for the next shift. It’s a noticeable upgrade over the earlier 2-pack in capacity without the storage demands of the four-pack option.
What It Does Well
- Higher 2100mAh capacity over the 1500mAh 2-pack from pick 2
- Two matched cells simplify rotation and charging cycles
- 10,000-cycle rating supports multi-year daily use
Details To Watch
- Two-pack cost sits above single-pack entry options
- Storage and charging space still needed for two cells
Made For
Two-operator crews wanting extended runtime without managing four-cell inventory.
Another Choice May Suit
Larger fleets running four-plus remotes should consider the Giobbiy BA213020 6V 2100mAh Battery (4-Pack) for fuller coverage.
Matching Capacity And Pack Size To Your Remote Workload
Capacity is the first decision, and the gap between 1500mAh and 2100mAh shows up in real shift length. The 2100mAh cells are rated for roughly eight hours of continuous transmitter use per full charge, while the 1500mAh packs typically run shorter under the same workload. For a half-day job, either tier works. For full eight-hour shifts, the higher capacity reduces mid-day swaps.
Pack count matters as much as capacity. Single packs suit solo operators with one remote. Two-packs give a matched rotation pair so one charges while the other works. Four-packs make sense when running multiple remotes across a yard or rental fleet, with spares staged at charging stations. Match the count to how many handhelds stay in active rotation.
Compatibility is built in across all five options, covering the BA214061, BA213020, FUB10AA, and MN471560 HBC handheld shells. Ni-MH chemistry also avoids the memory effect that plagued older NiCd (nickel-cadmium) cells, meaning partial top-ups don’t gradually reduce usable capacity over the cell’s life.
Charging habits extend service life. Owners commonly report Ni-MH packs benefit from occasional full discharge cycles to recalibrate capacity readings, and storage in a cool, dry space reduces slow self-discharge between uses. The 10,000-cycle rating on the 2100mAh cells suggests years of daily use, but that lifespan depends on avoiding deep discharge and excessive heat during charging.
Fit and ergonomics stay consistent across every pick, with identical 251 x 55 x 20 millimeter dimensions and 420-gram weight per cell. That means direct swap into existing battery bays without shimming, and predictable balance in the handheld during long crane operations.
What To Watch Before You Commit
Mistakes Worth Dodging
The most common slip-up is buying the wrong cell count for your rotation. Solo operators sometimes over-buy four-packs they can’t keep charged evenly, while multi-operator crews under-buy single packs and end up sharing spares. Count your active remotes first, then add one or two in reserve.
Skipping model verification is another easy miss. Even though all five options list universal compatibility across BA214061, BA213020, FUB10AA, and MN471560 shells, it’s worth confirming your specific handheld’s battery bay matches the 251 x 55 x 20 millimeter footprint before ordering, especially on older units.
The Case For Spending Up
The jump from 1500mAh to 2100mAh costs more per pack but extends usable runtime by roughly 30 to 40 percent on a full charge. For operators who charge overnight and run long shifts, that extra capacity means no mid-day swap. The 2100mAh cells also carry a 10,000-cycle rating, suggesting longer service life under daily use compared to lower-rated alternatives.
Paying more for the four-pack only makes sense if you actually rotate four cells. Otherwise, the 2-pack in the higher capacity tier delivers the same per-cell benefit without the storage and charging complexity of managing four packs at once.
Frequently Asked Questions
How long does a 2100mAh HBC battery last per charge?
Roughly eight hours of continuous transmitter use under typical workloads, though heavy signal traffic or cold weather can shorten that window.
Can I use a 1500mAh and 2100mAh pack interchangeably?
Yes, both share the same 2x6V output and identical physical dimensions, so they fit the same handheld bay without modification.
How many charge cycles do these Ni-MH cells handle?
The 2100mAh options are rated for 10,000 charge-discharge cycles, while the 1500mAh cells follow standard Ni-MH longevity for similar daily-use patterns.
Do I need a special charger for these packs?
Any charger rated for 2x6V Ni-MH HBC-style packs works, including the original unit that shipped with your remote.
Will these fit older HBC transmitter models?
The universal fit covers BA214061, BA213020, FUB10AA, and MN471560 shells, which span most HBC Radiomatic crane and pump-truck handhelds in active service.
The Takeaway
Any of these five Giobbiy packs will bring a tired HBC handheld back to a full shift. Solo operators get the most from the single 2100mAh unit, two-operator crews get the cleanest rotation from either 2-pack, and busy shops running multiple remotes benefit from the four-pack’s matched inventory. Pick the capacity and count that match how many handhelds you actually run, and you’ll keep the cranes moving.





